Landing Day: How to Watch, What I Worked on, and Thoughts on the Landing

Landing Day

After 8 months and about 225 million kilometers, the Mars Science Laboratory (Curiosity) rover is set to arrive at Mars.  After a 10 years of designing, building, and testing, we are finally ready to put our vehicle on the red planet.  Touchdown will occur at approximately 10:30-10:32 pm PDT (1:30-1:32 am EST), so make sure you’re tuned in somewhere then.

Here’s how to watch the landing:

And while you watch, why not enjoy a Curiosity cocktail?

What Will You See Tonight?

Landing on Mars is extremely difficult, and much hype has been put out over that.  But in all honesty, at this point in time there really isn’t anything that anyone on Earth can do but wait (and eat peanuts).  The final landing software has been loaded onto the rover, and it is on autopilot until its wheels are on the ground.

Earth will actually set on Mars before the rover is safely on the surface, so the Mars Odyssey orbiter will be our primary way to hear about what is happening.  Odyssey is working in a “bent pipe” mode where it beams directly what it hears from the rover back to Earth.  If we don’t hear the first transmission, it will rebroadcast once it completes another Mars orbit (about two hours later).  Another spacecraft, the Mars Reconnaissance Orbiter, will record the landing and first transmissions and beam them back to Earth, however that won’t happen for something like 12 hours.  The most important transmission we could receive is a “tone”, what mission operators describe as a text message from the rover that gives a landing velocity and estimated position.

In the absolute best case scenario, we will get one image from the rover’s back up camera (Rear Hazcam).  It will be black and white, incredibly small, and low resolution.  It is highly unlikely we’ll see this.  More likely, we will have to wait until the second Odyssey pass around 12:30 am PDT.  On that flyover, we could get a Front Hazcam picture.  Again, this would be a low quality image.  In the days to follow, full color, high resolution images will flood to Earth, including a 5-fps movie of the final landing sequence taken from the rover.

What you will probably not see is me.  The Jet Propulsion Lab has been under total lockdown since Friday.  Only the operators, media, and VIPs will be on lab tonight.  The primary “viewing party” is at Caltech.  I’m not at that event (slightly annoyed…some choices were made by the powers that be on the order of the invites…).  I will be at the Pasadena City College with the majority of the plebeians, and I’m not sure what news coverage will be there.  In actuality, I’m a little glad: the location is a bit closer to the bars than Caltech…

Media display on the Jet Propulsion Laboratory mall.

Media display on the Jet Propulsion Laboratory mall.

My Involvement

I joined up with the Mars Science Laboratory Rover Chassis team in February 2007, about six months before the rover Critical Design Review.  On day one, it was made very clear that I would be working on several pieces of flight hardware (i.e. things that would fly on the rover).  All in all, I delivered about 15 parts/assemblies that are bolted to the rover prior to leaving the project in 2009.  Six of these are somewhat involved in today’s landing.

On the rover is an electronics box that is responsible for firing some of the 76 pyrotechnic events around the rover during landing and more on the first few days on the surface.  The decision was made during the project that this box should live outside of the rover so that our warm volume in the chassis was reserved for instruments used throughout the mission (the pyro firing box is not used after it fires all its bolts).  Since Mars is very cold, something was needed to keep this box warm for the first few days of the mission.

In essence, I built a box, albeit a very, very complicated one.  The job of this was to surround the pyro firing unit with a warm blanket of CO2 (the primary component of Mars’ atmosphere).  This involved lifting the box off the chassis deck by means of four “legs”.  These legs were especially complicated because they had to adapt to a set of bolt locations that had been determined before I arrived on the project (and, of course, were in a terrible layout).  Not only that, they had to thermally isolate the box from the deck of the rover and account for an approximate 100 C temperature differential in the space of an inch or two.  Finally, the box had to squeeze itself into a very oddly shaped volume, avoiding not only one of the main struts that locks the rover to the descent stage, but also one of the stowed wheels and the differential that controls our suspension system.  It looks pretty bizarre out in the open.

RPFA Thermal Enclosure

Me and the flight RPFA Thermal Enclosure.  Very sleep deprived in this shot.

You can see the box in context below (labeled 2).  The interesting thing is, one of the first pictures to come back from the rover will be of the tiny, joystick looking thing sitting on top of my box (a calibration target).  So if all goes to plan, you’ll have a nice picture of this thing sitting on Mars next week.

Mars Science Laboratory overview. Thermal Enclosure is labeled item 2.

Thoughts on the Landing

Today marks the end of a very long journey for me.  Back in 4th grade, I found aerospace engineering through my father’s childhood model rocketry kit.  Hidden back behind our train layout in the attic, it was filled with parachutes, thermometers, fin stock, and old catalogs.  It smelled of sulfur from launch days past.  It was not long until I was firing off my own rockets in Wilmington, DE’s Rockford Park.  Down the road at Tower Hill School, I was given the opportunity to start a rocketry club by my science teacher at the time: Marie Vayo-Greenbaum.  It was through her support, and later the support of the rest of the science and math department, that I am here today.

Shot from a digital rocket camera I built in high school. Photo was taken in Fall 1998 with a Kodak DC20 in “high resolution”.

Strangely, as I write this, I’m not nervous at all.  I’m actually feeling the same sort of pre-show anticipation that I get before walking on stage with Beware of Safety.  Oh, and while I’m on the topic, I have to apologize to the band North.  North wanted to play a show with us tonight, which I, for obvious reasons, declined.  It did, however, generate one of the best email chains ever:

Adam Kay: North is back in town to support their new release. I’d love to play with North. Who else is interested?

Steve Molter: Why does north like playing LA on Sundays?

Me: I can’t do it.  MSL is landing on Mars that night.  I will be occupied.

Steve Molter: In the history of bands, no one else has ever uttered anything similar to this.  I love it! :)

Ah, my life…

Beyond anticipation, the thing I’m feeling most is gratitude.  I’m grateful for the teachers at Tower Hill and USC that supported me.  I’m grateful for those that tore me apart, not because they could, but to make me better.  I’m grateful that my family pushed me to become more than I thought I could be.  I’m grateful for the support (and patience) of my girlfriend Kerri and my friends.  I’m grateful for the all-nighters, the failed tests, the unachievable standards imposed upon me, and for the 2008 MSL launch slip.  They taught me that my job isn’t over at 99%.  I’m grateful for those that let me struggle to learn, and those who sacrificed of their own time to help me cross the finish line.  And, despite all of the politics that hold us back from being truly amazing, I’m grateful that I live in America, where we believe it is worth investing in a future beyond the horizon.  It is because of these people and because of you, that I am here today.  Success or failure tonight won’t change that.

So from the bottom of my heart, thank you.

About morganhendry

I have been a musician and rocket scientist since 4th grade. I play drums/keyboards for the LA based instrumental rock band Beware of Safety (www.bewareofsafety.com), write electronic music as The Laterite Road (www.thelateriteroad.com), and just landed something on Mars (mars.jpl.nasa.gov). More info can be found at my website (www.morganhendry.com). Sign up here for updates on my many projects: http://morganhendry.fanbridge.com/
This entry was posted in Beware of Safety, Space and tagged , , , , , , , . Bookmark the permalink.

14 Responses to Landing Day: How to Watch, What I Worked on, and Thoughts on the Landing

  1. Daniel Frohlich says:

    Really awesome Morgan…goodluck tonight. We’re living in exciting times right now :)

  2. Vita says:

    Morgan- I can’t tell you how very proud I am of you, not only for what is about to happen tonight but for how you got to this point! You had a passion, knew what you wanted, worked hard(REALLY HARD!) and followed your dream. I know this is just the start of your success as you continue to shoot for the moon and reach for the stars. Also, I would be remiss if I took all the credit: Thanks so much to the West Coast Support Team-Kerri you are the best, thanks so much for taking such good care of my baby! Looking forward to the future. XXOO. MOM

  3. Ben and Paula says:

    We will be watching..Congratulations to you Morgan. Great job. Ben, Paula, and…Joey

  4. Tina says:

    We are so very excited for you Morgan! Couldn’t be more proud. We love you. Auntie Tina, Uncle Bob, Ryan and Casey.

  5. pamela says:

    The Masters’s’s’s’s will be thinking of you as we watch, and beaming with joy that we have a pal who had a part in this amazing journey!

  6. Buzz says:

    There are few times in our lives that we have a chance to have an impact on history for ourselves, our families and for a few, the future world. May tonight just be the beginning of your times.
    Congratulations, Morgan!!

  7. John Krill says:

    Morgan, you’re helping to make a positive difference in our world – a world which you’re showing us is far, far larger than we ever dreamer existed. May goodness come from your work and continue on and on and on. With appreciation, John Krill

  8. Morgan L. Hendry III says:

    Congratulations to you and all at JPL who worked on this project! It has been great to see the MSL’s progress from the sub-assemblies, to the final assemblies in the clean room, and to even get to sign the log that is digitalized and now on Mars! To see the landing site mock up in the JPL yard, extremely accurate in size of Mar’s rocks and location of each and every rock (determined from earth with satelites orbiting Mars) and to know it arrived without orbital correction is mind boggling; congratulations to those who did the orbital mechanics! The whole project has been an absolutely amazing feat and really, the journey is just beginning as the discoveries will now begin as JPL scientists and we will learn so much. This is really fantastic! Again, congratulations – DAD

  9. Kerri Anderson says:

    I’m always the last to read your blog (mostly because I see you everyday!) and for that, I’m sorry. From the very beginning, I had a front row seat to all the blood, sweat, tears and time you put into this so I know just how hard it all was. You keep thanking me for sticking by you through this and you’re welcome because of course it wasn’t always easy. The truth is, though, it made me love you more. I’m so glad that I got to be the one holding your hand as the rover touched down.

    xo,
    K

  10. Millis Mitts says:

    Morgan, congratulations on a job well done, you and the whole team deserve quite a lot of rest I’m sure but there’s work to be done also. Again, CONGRATULATIONS!!!

  11. Terri Hendry says:

    Great blog, Just found it! Following your posts, incredible. Congrats! Aunt Terri (Another Science Geek, but at a lower level!)

  12. Pingback: Guest post: How much does the #1 game on the iOS store earn in a day? $199k (I think)

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s